salt spray test chamber

Inner box size:600×400×450（W×D×H）mm

outer box dimensions:1080×650×1080（W×D×H）mm

one.Technical Specifications:
1.Temperature range:RT+10℃~55℃
2.Humidity range: ≥93%R.H
3.Temperature uniformity: ±2℃
4.Temperature fluctuation: ±0.5℃
5.Fog settling amount:1～2ml/80c㎡
6.Spray mode: continuous/Cycle selection
7.Test method:
Neutral salt spray test（NSSExperiment, Acetate Salt Spray Test（ASSTest, salt spray test（SSExperiment)
Copper accelerated acetate salt spray test（CASSSalt spray test methods such as experiments;
8.Sample rack: The sample rack can meet the requirements15℃~30 ℃ tilt test (two-layer);
9.Air compressor model:V-0.013/12.5(Customer provided) Exhaust pressure:1.25MVolumetric flow rate:0.13m3/min
two.Material for box production:
1.The salt spray test chamber is imported as a wholePVCReinforced hard plastic board, with a smooth and even surface, and resistant to aging and corrosion; Abandoning fiberglass material should be timely

Resulting in surface fading and fibrosis.The all plastic structure salt spray test chamber is more capable of meeting long-term strong acid and strong salt spray tests without causing any damage.
2.The box cover is made of fully transparent imported impact resistant board,Easy to observe the test condition of the test sample during the experiment.The box cover and body are sealed with water to prevent

Salt spray leakage;
three.Heating system:
1.The test temperature inside the box is water jacket heating and humidification, and the heating device uses a titanium alloy protective tube with a built-in nickel chromium alloy far-infrared heating core.

Fast heating and uniform temperature distribution; And compared to fiberglass box jacket heating, it saves about half of the power consumption.
four.Execution standard:
This product meets the requirementsGB2423.17Basic Regulations and Tests for Electrical and Electronic ProductsKa》Salt spray test method andGB/T10125-1997（ISO9227：2006）TheGB10587TheGJB150TheDIN50021