Wheelchair brake fatigue testing machine

1、 Equipment Overview: Fatigue Durability Test for Wheelchair Brake.

2、 Compliant with standards: According toGB12996-2024Chinese6.9.3.3TheGB18029.3-2021pass the civil examinations7Chapter requirements.

3、 Technical parameters:

1Control method:PLCControl, independent control box, touch screen human-machine interface operation;

2Testing station:1Workstation;

3Testing framework: The lower part is made of electrophoretic aluminum alloy, the upper part is sprayed with plastic, and there is an independent control box;

4Equipment load: dummy, test and install backboards, etc., to be provided by the user;

5Driving power: one set of AC deceleration motors at the front and rear, and one set of servo motors to adjust the angle of the moving rollers+The turbine reducer and brake control are both pneumatic;

6Speed regulation: frequency converter regulation,1.0m/s_+0.1m/sAdjustable;

7Wheel diameter:∮250+-25mm.width800mm；

8Roller adjustment:A fixed set of electrically adjustable distances, maximum distance900mmUsing screw guide rails for easy adjustment;

9Sample installation: Hand pushed sloping flat plate, movable and detachable aluminum alloy profile fixed;

10Angle adjustment: Servo motor drives the moving roller wheel0-10° adjustable;

11Braking position: equipped with two sets of detachable cylinder banks, which can be installed at any testing position, fixed with aluminum alloy profiles for adjustment and fixation;

12Sample installation: Hand pushed inclined flat plate;

13Protective device: fixed silicone protection with aluminum profiles on both sides, adjustable distance;

14Fixed device: Adjustable aluminum profiles on the left, right, front, and back, fixed with silicone protection;

15Work cycle: touch screen can be set;

16Equipment size: Length3000Xwide2000Xhigh22000mm（L*D*H).

17Equipment power supply:AC220V 50Hz.