Waterproof Test Equipment (IPX7)

Anti immersion testing equipment（IPX7）

1. The test should be conducted when the second characteristic number of the shell protection level is 7.

*2. The main structure is made of 2mm thick 304 stainless steel material (reinforced with steel bars);

*3. The upper dimensions of the water tank are square, ≥ 1M * 1M * 1.2M (h);

4. The lower part of the water tank is designed with a funnel shape, with a height of ≥ 0.5M, which facilitates the experiment without impurities affecting the experimental process;

5. The bottom of the water tank is fixed on site with stainless steel pipes;

*6. Separate the upper and lower parts with a stainless steel mesh, and use it as a support surface for the sample, with a load-bearing capacity of ≥ 100KG;

7. Stainless steel stair treads are used for easy access to samples and maintenance;

8. Set a height display mark on the edge of the water tank (with the sample support surface as the zero position) to facilitate the experiment;

9. Equipped with 1 water temperature measurement and digital instrument display;

*10. It is also equipped with corresponding pipelines for water inlet, drainage, sewage cleaning, overflow, etc., which can be connected on site according to the needs.

Anti immersion testing equipment（IPX7/8）

1. The test should be conducted when the second characteristic number of the shell protection level is 7/8.

*2. Simulate immersion depth of 0-50M;

3. The inner tank size of the immersion tank is ≥ Ø 500mm*1000mm (H)；

4. The internal surface is made of stainless steel material

5. The immersion depth can be adjusted according to the size of the product and can be observed externally;

*6. Closed container design, using compressed air to apply a pressure of 1-5 atmospheres;

7. Use intelligent sensors to sense water pressure data and provide feedback to customized instruments

8. The atmospheric pressure value is displayed using a dedicated instrument (and can also display a bar chart);

9. Working gas source: external connection; Attached sample holder

10. Working power supply: 220V, 50Hz