UL Spray Test Device DMS

The UL spray test device complies with the standard:

The UL water spray test device is manufactured in accordance with the requirements of UL60507-ENGL 1999 standard figures 38.1 and 38.2, as well as the clauses of Figure 10/Figure 11 in ANSI Z21.10.3-2004, Figure 11 in ANSI Z21.58 standard, and CSA 4.3-2004 standard, and meets standards such as UL1598, UL153, UL1703, UL1741, UL514B, UL1278, UL1571, etc.

The UL rain nozzle (spray head) complies with relevant standards such as UL60507-ENGL 1999, UL484-34, ANSI Z21.10.3-2004, ANSI Z21.58, ANSL B94.11M, and CSA4.3-2004. There is a set of three UL nozzles (spray heads), all of which are imported and manufactured by UL Laboratories in the United States.

Technical parameters of UL spray test device:

1. Outer frame size: length 1500x width 800x height 2000mm (height adjustable, 1000-2000mm);

2. The height of the nozzle water column intersection point from the ground can be manually adjusted from 0-1000mm;

3. Nozzle holder movement method: adjustable up and down;

4. Bracket material: industrial aluminum profile, bracket base adopts universal brake casters;

5. Quantity of Type A nozzles: 3 UL imported nozzles, each with a water pressure gauge.

6. Use water source: Ensure that the water flow pressure is within 50-150kPa of clean water;

7. Nozzle flow rate: ≥ 10L/min;

8. Range of water pressure gauge: 0-0.25mpa;

9. The hole of the sprinkler head meets the requirements in Figure 38.2 of UL60507;

10. Precision pressure gauges: 4 pieces;

11. Boosting water pump: Industrial specific boosting water pump;

12. Flow meter: Float flowmeter;

13. Spray control mode: automatic control mode, set the time to automatically stop spraying water;

UL water spray test device material accessories:

The UL water spray test device is composed of a beautiful aluminum profile assembly frame and a dedicated water pump delivery system, which is simple and practical. By using an intelligent control system, set the spraying time to automatically stop the water supply.

1. Framework: Aluminum material;

2. Nozzle: imported from UL laboratory in the United States;

3. Spray pipe: 4-point stainless steel pipe+PV pipe combination;

4. Water pressure gauge: Special brand pressure gauge with a range of 0-0.25mpa;

5. Flow meter: specialized float flow meter;

6. Controller: CKC time relay;

Type B: UL45 ° Spray Test Device

Technical parameters of UL spray test device:

1. Sample holder, made of SUS304 stainless steel material; (Sample rack can support 50kg)

2. Test water pressure: 138kPa;

3. Boosting water pump: Industrial specific boosting water pump;

4. Precision pressure gauge: 1, water pressure gauge range: 0-0.25mpa;

5. Nozzle: 1 UL B nozzle from the United States;

6. Spray angle: 45 degrees above the center point of the product as shown in the picture.

7. Spray pipe: 4-point stainless steel pipe+PV pipe combination