Static load strength testing device for sports rehabilitation training robot

Applicable standards for static load strengthGB_T 37704-2019General technical requirements for sports rehabilitation training and rehabilitation equipment;

Static load of the main supporting components used to carry the entire body weight of the human bodystrength test

The load-bearing form of the main supporting components that bear the entire body weight of the human body can be simplified as two end support type [see Figure 1a)] or one end support type [see Figure 1b). Apply a 2000N test load to the surface of the maximum force point (usually located in the middle) of the two end supported type during normal use; Apply a 2000N test load to the surface of the cantilever end of the one end supported type during normal use. When the bearing surface is separated, the test load should be applied to the entire surface area of the bearing surface in proportion, held for 5 minutes, and the deformation during the bearing should be measured. After unloading, the deformation should be measured and checked for cracks, damages, and other phenomena.

Technical Specifications:

1 、Test loadForce value:2000NCan be set; (Add static load weight: combination weight)2000Ng 1Item)

2 Loading time:1～9999sCan be set;

3 Display mode: digital display, display accuracy0.1N；0.01Kgf；