Stability test bench for brake effect of hand pushed baby stroller

1、 Product Overview: The standardized production and testing method for baby strollers is to place the model baby on the stroller platform and place the stroller platform on itAdjust the tilt angle of the 80 grit sand test bench until 30 seconds have passed, and then visually inspect the vehicle to check its stability.
2、 Compliant with standards: According toGB 14748-2006 Safety Requirements for Children's strollers, Referring to EN1888-2018, GB6675.2-2014 Toy Safety Part 2: Mechanical and Physical Properties.
3、 Main parameters:
1. Control mode: button control;
2. Testing station: 1 station;
3. Equipment material: Made of 40 * 40 square steel frame, welded, polished and sprayed;
4. Base size: (length 2100 x width 1500) mm, wooden board thickness about 20mm;
5. Equipment configuration: Corresponding standard block, made of aluminum, rectangular block with a cross-sectional area of 25mm * 25mm;
6. Angle adjustment: using electric mechanical adjustment, stepper motor driven screw adjustment;
7. Test bench size: capable of meeting static tests at different angles; Meet the experimental requirements;
8. Angle adjustment: 0-45 °, accuracy: ± 1 °;
10. Standard weights: equipped with corresponding test weights and tools (test weights A, B; Additional weight 2kg);
11. Protection device: It is necessary to have a weight specific protection device to ensure that the weight will not tip over;
12. Stability test requirement: A stopper with a cross-sectional area of 25mm × 25mm, adjustable in height to the height of the wheel axle, and with a length that can block the outer wheel;
13. Sandpaper model: 80 grit sandpaper, size (2100 × 1500) mm, one sheet, used for stability testing, can be fixedly attached to the platform;
14. Equipped with test weight C; another 2kg weight;
15. Control standard: stepper motor;
16. Equipment power supply: AC 220V 50Hz