Touch Screen GB/T20234 Vehicle Roll-over Test Apparatus DMS-NY

The touch screen GB/T20234 vehicle rolling test device complies with the requirements of Article 7.21 of the standard GB/T20234.1-2011 "Connection Devices for Conductive Charging of Electric Vehicles Part 1: General Requirements".

The power plug and vehicle plug of the touch screen GB/T20234 vehicle rolling test device cable are randomly placed on the cement ground, and a pressure of 5000 ± 250N is applied at a speed of (8 ± 2) km/h to test the ability of the power plug or vehicle plug to withstand rolling (tire inflation pressure 220 ± 10 kPa).

Vehicle Rolling Test Device Connection Device for Conductive Charging of Electric Vehicles

The power plug of the cable and the vehicle plug are randomly placed on the cement floor, usingApply a pressure of 5000 ± 250N to the power plug at a speed of (8 ± 2) km/h

Or vehicle plug (tire inflation pressure 220 ± 10 kPa)To test the ability of power supply or vehicle plugs to withstand crushing.

According to the standard:

meet the standardGB/T20234.1-2011 "Connection devices for conductive charging of electric vehicles - Part 1: General requirements"7.21Requirement.

Technical features:

A steel frame with surface electrostatic spraying is used to form the frame, and the bottom plate simulates a cement floor. The rolling mechanism can simulate a car rolling an object and sliding up and down freely. The plug bears the same pressure,

And equipped with limit protection, another set of driving devices drives the rolling mechanism to achieve forward and backward rolling actions, and the main components are made of stainless steel and aluminum. (Ensure that the tire is rolling over the sample under normal conditions)

Technical Specifications:

1. Load bearing capacity: 5000 ± 250N;

2. Rolling speed: 8 ± 2km/h;

3. Bearing bottom plate: The bottom plate is equipped with a cement surface and can be equipped with fixed fixtures;

4. Timing display: adjustable from 0-999999;

5.Lifting device: The imported guide component allows the load to move freely up and down;

6. Rolling device: AC motor with screw rod for front and rear operation;

7. Protection device: 500mm protective nets are installed on both sides of the rolling equipment;

8. Working power supply: 220V;

9. Variable speed motor: 4000W AC motor;

10. Inverter power: 5000W;

11. Weight: 500kg, quantity is 11;