Sand and Dust Test Chamber

AModel and specifications

1、 Model:DMS-FCType（1Taking cube as an example, other sizes can be chosen)

2、 Studio size:1000×1000×1000(mm)(Depth x Width x Height)

3、 Dimensions: Approximately:1200×1650×2150(mm) (Depth x Width x Height)

BInstitution and Material

1. Inner liner material:SUSStainless steel plate;

2. Shell material: non embroidered steel plate spray painted;

3. Door: Tempered glass door;

4. Sample rack:2Layered network(detachable) .

5. Installation of suspension bars: top of the box, load-bearing capacity250 kg；

6. Temperature and humidity range:15℃～65℃(adjustable)，45％R·H～75％R·H(External control); Humidity is the ambient humidity

7. Dust concentration:2 kg/m3;

8. Test hole:1One;

9. Sample recycling system: recyclable;

10. Sample talc powder: dust concentration can be measured,2kg～4kg/m3. (Optional, not included as standard)

11. Test piece power socket: dustproof socket;

12. Controller: Imported touch screen+PLCController (with customizable control functions);

13. Dust blowing time (stop, blow)h/m/s: Adjustable;

14. Cycle period: arbitrarily adjustable;

15. Preset test time:0s~999h99m99sAdjustable arbitrarily;

16. Power on: Off-through-Cut off;

17. Metal mesh size: nominal wire diameter50 umNominal spacing between lines:75 um；

18. Exhaust fan: centrifugal high-quality domestic fan;

19Vacuum system: equipped with pressure gauge, air filter, pressure regulating triple piece, connecting pipe (vacuum pump is separately equipped, please specify when ordering)

20Equipped with a vacuum capsule pressure gauge, saving the calculation time for vacuum pumping

20Standard: This test chamber can meet the requirementsGB2423（La2Blowing dust)GB4706TheGB4208TheGB7000.1Requirements for shell protection level testing of household appliances, low-voltage electrical appliances, lighting fixtures, automotive, motorcycle components, etc. This device complies withGB4208-2017China National Publications Import & Export (Group) Corporation2requirements