Power cord bending testing machine

Power cord bending testing machine

*1.According to the standard: based onGB2099.1-2008 "plugs and sockets for household and similar purposes - Part 1: General requirements" Test requirement 23.4 Flexible cables and their connections. GB4706.1-2005 "Safety of household and similar household appliances - Part 1: General requirements" Test requirement 25.14. GB/T5023.2-2008 "Polyvinyl chloride insulated cables with rated voltage of 450/750V and below - Part 2: Test methods" test 3.2 Bending test. Require the conductor to pass through approximately0.1A current testing requirements. Factory inspection site representative witnessed the testing guide swing test.

2.Test purpose: TestingSpecial equipment for the flexural fatigue strength of AC and DC power cord seasonal plug leads. It can automatically count and stop the operation when the sample is bent and broken until it cannot be powered on. (Standard model with speed display)

3.Fixtures: Six sets

4.power supplyAC220V ±10% 5A；

5.Motor power90W/220V AC；

*6.Bending angle: left and right respectively30, 45, 60, 90 adjustable (0 °)～180 ° continuously adjustable) (weights can be configured according to actual requirements)；

*7.Bending speed: can be directly displayed, header display;

8.Counter: Six good product counters, one pre-set counter；

9.Load:5N,10N,20N；

10. Control method: internationally renowned brand touch screen;

11.volume845×400×945MM.