Plug and socket life testing machine DMS-9401A

Overview of plug and socket life testing machine：

1. Designed according to the corresponding provisions of GB2099-96, GB16915-97, and IEC884-1, it is used for mechanical life testing of plug and socket products for household and similar purposes.

2. This testing machine is connected to the power load cabinet and can perform tests on the electrical life, normal operation, and breaking capacity of plugs and sockets.

3. Some fixtures can be added according to customer requirements to test wall switches, toggle switches, pull switches, toggle switches, flip switches, and self popping buttons.

4. Can be used in conjunction with DMS-FZ02 load.

Technical characteristics of plug and socket life testing machine:

1Control system for plug and socket life testing machine:

adoptImported Siemens 7 inchColor touch screen enables human-machine dialogue，The controller adopts PLC Programmable controller for implementing input-output logic control，PLC The memory of the controller has 100 groupoftenCapacity for storing experimental data，U The disk can be accessed through the touch screen USB 2.0 high-speed interfacerealCurrent number of experimentsaccording toThe storage.controlTesting of equipmentverifyThe data haspositiveFrequent power outages andmeaningExternal data interruptionguaranteeMaintain functionality,againNext timeelectricityAfterwards, the experiment that was not completed before can continue.

Contactor: AdoptingImported SchneiderHigh performance load contactor

Relay: AdoptingImported SchneiderArc barrier equipment with high insulation strength intermediate relay

Button switch: adoptsImportZB2BWM Series DefensemeaningExternal trigger button switch

2Plug and socket life testing machinePower system: Adopting original imported Siemens servo motors, the gearbox adopts original imported turbine worm gearbox

3. Test station: Two stations. ·Each workstation is equipped with a straight roller push rod (suitable for wall switches, rocker switches, etc.), a straight pulling clamp rod (suitable for pulling switches, reversing switches, etc.), and a straight push rod with buffer (suitable for self elastic or self-locking buttons, pull switches, etc.). The plug and socket life testing machine does not include plug and socket test pieces for life testing.

4Operating mode: Operating stroke 0.1～100mm RenIntentional setting, resolution 0.1mm， Operating speed 0.1～800mm/s Any setting，resolution0.1mm/sThe maximum pushing and pulling force is ≥ 500N;

5Test itinerary: The distance between the test plug and the test socket is ≥ 50mm，The itinerary is continuously adjustable;

6Power on time: 0.1-99.9 RenmeaningSetting, where the plug and socket mode has the function of selecting continuous power on and intermittent power on;

7Test rate: 1-30 timesbellAny setting

8Total counter: 1 to 999999RenIntentional setting, automatic shutdown when the count reaches the set value;

9Min. counter: 1-999999evenContinuous counting, with data power-off retention function;

10Alarm detection：Comply with thethroughMust pass, thisseverMust be Broken "OriginalthenWhen detectingtoProduct appearancenoLiangshi has a voicelightCall the police andhaveText promptphaseTest Station

11Load interface: Reserved load interface for easy connection 1 Taiwan or 2 Suitable external loads of various types, such as tungsten filament lamp loads, fluorescent lamp loads, motor loads, electric motor loads, capacitive loads, inductive loads, resistive loads, etc

12Working power supply:AC220V、50Hz、 **；

13. Dimensions: W640mm×D350mm×H330mm；

14Working conditions: The ambient temperature is 0～40℃、phaseFor humidity ≤ 85%RH；

Other instructions for plug and socket life testing machine：

1．The testing machine is used to inspect the damage degree between the plug and socket after a certain number of breaking capacity and normal operation, and to assess the mechanical and electrical life of the plug and socket;

2．Each workstation can independently test and count. If a sample fails at one workstation, the workstation will automatically stop and retain the count value, without affecting other workstations to continue testing;

3．The working stroke of the test sample and the pressure applied to the test sample should be adjustable according to different requirements;

4．The fixture should be adjustable to achieve accurate alignment, avoid one-sided problems, and ensure the normal progress of the test;

5．The equipment should have a good grounding system and reliable electrical protection measures.