Equipment Overview: This equipment is a pin swing test device designed and manufactured according to the requirements of Chapter 5.3 and Figure 26 of GB1002-2024 for pin bending test. The equipment uses a stepper motor and ball screw to drive the swing chuck, and the control system adopts PLC and Chinese English human-machine interface. The operator can select the test mode and set the test parameters on the human-machine interface.
+8675526585726
sales@damslab.com
DESCRIPTION
Equipment Overview: This device is based onGB1002-2024in5.3Chapters and figures26The pin bending test equipment is designed and manufactured according to the requirements of the pin bending test. The equipment uses a stepper motor and a ball screw to drive the swing chuck, and the control system adoptsPLCAnd the human-machine interface in both Chinese and English allows operators to select test modes and set test parameters on the human-machine interface.
Equipment parameters:
1.Swing speed:0-30mm/s(Adjustable).
2.Swing stroke:0-100mm(Configurable).
3.Swing mode: Linear motion mode to pin the top.
4.Drive mode: stepper motor
5.Control method:PLC+7Inch touch screen
6.Test frequency:0-9999After the experiment is completed, it will automatically shut down.
7.power supply220V 50HZ
INQUIRY
+8675526585726
sales@damslab.com
English
