Pendulum impact test device DMS-CJ

The pendulum impact test device is based on the standard:

According to GB2099-2008, IEC884-1, and GB18802.1 "Surge Protective Devices (SPDs) for Low Voltage Distribution Systems Part 1: Performance RequirementsSum up test method "7.9.2.1 Testing requirements.

GB17466.1-2008 "Fixed electrical installations for household and similar purposes - Installation boxes and enclosures for electrical accessories - Part 1: General requirements", Part 15Chapter, Mechanical Strength Test Requirements

Refer to Chapter 3.3 of GB/T2423.55-2006 "Environmental Testing for Electrical and Electronic Products - Part 2: Test Methods - Test EH: Hammer Test"Testing device requirements

Designed in accordance with the relevant provisions of the "mechanical strength" test specified in the standard, it is used to assess the impact performance of electrical accessory casings. Can be used for mechanical strength testing of plugs, sockets, and electrical accessories for household and similar purposes.
Pendulum impact test deviceTechnical features:
1. The pendulum impact test device has a pendulum shaft length of 1000mm, and the specimen mounting seat can move forward, backward, left, right, and 60 degree angles;
2. Mass of impact component: 150g
3. Drop height: 100mm, 150mm, 200mm, 250mm;
4. Size: 1700 × 350 × 700mm