Pendulum impact and drop test device

1、Control method:PLCControl, touch screen human-machine interface operation;

2Testing station:1Workstation;

3Framework structure: The overall structure adopts steel square tube as the skeleton, cold-rolled steel plate sealing, independent control box, spray coating process, and the bottom is equipped with leveling casters for easy transportation and installation;

4Device driver：The lifting and lowering of the pendulum are driven by a stepper reduction motor, and the drop height of the pendulum is driven by an independent servo reduction motor，The release method is released by the respective electromagnetic magnets;

5PendulumSwing rod: length1000Mm, andpendulumHammer heads constitute equivalent masses;

6Impact height: The pendulum achieves the corresponding impact height by pulse adjusting different angles through a servo motor, while the falling hammer achieves vertical impact by precisely controlling the displacement height through a stepper motor;

7、Swing rod length:From the center of the swing rod seat to the center of the impact hammer1000㎜；

8Pendulum hammerHead:5JThe10JThe20JThe50JCorresponding configuration hammer:1.7kgThe5kgThe5kgThe10kgeach oneEach hammer head is equipped with an independent swing rod (interchangeable pin type);

9Falling hammerHead:5JThe10JThe20JThe50JCorresponding configuration hammer:1.7kgThe5kgThe5kgThe10kgeach oneOne, equipped with stainless steel drop protection sleeve;

10Component material: Steel surface coated with hard chromium;

11、Adjustable height:pendulum200-2000mm,drop hammer2500mm；

12Sample installation: Equipped with a sliding fixed frame, large samples can be removed from the fixed frame and directly impacted when landing, while small samples can be backed against the fixed frame or fixed to the bracket with straps；