Non threaded terminal bending test device DMS-WLW

Overview of Non Threaded Terminal Bending Test Device:

The non threaded terminal bending test device shall comply with the provisions of GB2099.0-2008,12.3.12. Mainly used for conducting bending tests on non threaded terminals connected to wires and measuring their voltage drop.

Technical characteristics of non threaded terminal bending test device:

• Working power supply: AC220V * * 50Hz

Test current: AC 1-100A ± 3%

• Voltage drop measurement range: 0-199.9mV ± 3%

• Working mode: manual

Bending angle: 0-360 °

• Direction of force application: towards any direction that differs by 10 °± 3 ° (alternatively: bent in any direction that differs by 30 °± 5 °)

• Bending force: 0.25 N, 0.5 N, 1.0 N

• Force application direction: perpendicular to the direction of the unbent wire