Multi mobile socket mechanical strength testing device DMS-DYWCZ1

● Product Overview

This device complies withGB2099-2008 Figure 29 and IEC60884 Figure 29 standards are applicable for checking the mechanical strength of multi position mobile sockets with detachable wires installed with lighter flexible cables.

● Experimental principle

Fix the free end of the soft cable to the fixed end, with the fixed point at a height of from the ground750 mm, grab the sample and keep the soft cable in a horizontal state, then drop the sample onto the concrete floor 8 times. After each drop, turn the soft cable at a 45 ° angle at the fixed point. After the experiment, the sample should not show any damage in the standard sense, especially the components should not loosen or fall off.

● Technical parameters

Drop height:750mm

Number of drops:8 times

Rotating device:90 ° indexing, rotatable in 4 directions

Equipment dimensions:L*W*H 2300*500*860mm