Medical bed comprehensive testing machine

Medical bed comprehensive testing machine is a device specifically designed for testing and evaluating the performance of medical beds. It ensures the safety, stability, and functionality of medical beds comply with relevant standards and regulations by simulating various usage conditions and environments.

1Medical bed comprehensive testing machineUsage environment

1There are no corrosive media in the environment.

2. There are no major sources of vibration or strong electromagnetic fields nearby.

3Operating temperature: 10~35 ℃, relative humidity not exceeding 80%.

2、 Design Features

1. The experimental process is fully automated and programmable, with automatic loading, holding, and unloading after setting

2. Adopting a high-strength testing framework. The loading system is stable and reliable, with precise and controllable loading speed that can achieve slow and uniform loading

3. 7-inch large touch screen, pressure sensor with high precision, equipped with Siemens analog signal acquisition module and Siemens PLC, real-time automatic display of various test data and pressure.

4. The test stand adopts a detachable on-site installation structure with a base and steps, and the test sample can be pushed onto the base for testing.

3、 Technical parameters

1. Dynamic load durability test

Adopting a combination of basic weights and stepwise increasing force method.

Power range: 1350+100N * 6, can be preset

Adopting the method of load PAD clamping, free fall, reset clamping lifting, and repeated free fall cycle.

The height is automatically measured by a stepper motor and can be preset

Drop height: 100~300mm

Count: 0~99999 times

Frequency: 6-15 times/min

Specification of dynamic load test head: diameter 355mm+5mm, contact head spherical arc radius R800mm

2. Medical bed impact testing machineSpecifications

Power range: 1350+100N * 6, can be preset

Adopting the method of load PAD clamping, free fall, reset clamping lifting, and repeated cyclic free fall

The height is automatically measured by a stepper motor and can be preset

Drop height: 100-300mm.

Count: 0~99999 times.

Frequency: 6-15 times/min.

Specification of impact testing head: diameter of 200mm, total weight of 25Kg+0.1Kg, after subtracting accessories such as springs,

The weight of the bottom disk is 17Kg+0.1Kg. Spring requirement: 6.9Nmm+1N/mm

The frictional resistance level is 0.25-0.45N. When the spring is subjected to a force of 1040N, the deformation displacement is 60mm.

3. Parameters of medical bed compression testing machine

Power supply: AC 220V+10% 50Hz

Loading system: Using high-quality motor and gearbox to drive the screw, slow and uniform loading is achieved

Loading method: Continuous loading.

Loading speed: 1000N/min.

Load value: adjustable from 1000 to 15000N, using high-precision pressure sensors to precisely control the applied pressure.

Accuracy: 100N, Resolution: 1N

Pressure holding time: 1~99 (s) can be set arbitrarily, and the pressure will be automatically released after the time is up

Sample size: 2000 * 1400mm.

Medical bed comprehensive testing machine (five in one for dynamic load, impact resistance, compression testing, nursing bed tension rod dynamic fatigue, and side bar strength testing)