Mechanical Wear and Sandblasting Testing Machine

The mechanical wear sandblasting test chamber is a sandblasting mechanical wear test using dry automotive filament bulbs for front lights.

1、 Technical parameters:

1.Spray gun nozzle diameter:Φ1.3mm;

2.Nozzle pressure and flow index:0.6(+0.05/-0)MPaWhen the traffic is0.24+0.02L/min

3.Spray area diameter:Distance from silent mouth380mm±10mmLocated in the middle170mm±50mm

4.Silicon sand should have Mohr hardness 7Particle size0~0.2mm, showing a normal distribution, keratin factor1.8~2:5The jet should be essentially perpendicular to the surface of the specimen.

5.The distance between the nozzle and the workbench plane can be adjusted within the range of380~850or900mmThe500~900mmTo meet the testing requirements of specimens at different heights.

6.Sandblasting operation method:Spray guns and workbenches move automatically, and workpieces are manually loaded and unloaded.

7.The mobile spray gun is equipped with an imported rodless cylinder

8.Test bench size:Design according to customer needs

9.gas source:compressed air

10.pressure:0.6MPa(adjustable)

11.Requirements for gas source:pressure0.4~1MPaThe gas supply is not small0.7m3/min(The compressed air source is provided by the user themselves)The main air circuit isG1/2”12.Requirements for water source:Ordinary industrial tap water, the main water circuit isG1/2”.13.Total power:3.5KW

14.Power requirements:AC380(±10%)V/50HZthree-phase five-wire system

15Internal dimensions: Depth1000mmX width1000mmX high1300mm

External dimensions: Depth1300mmX width1500mmX high2300mm