ME rough handling test device

Equipment rough handling test device

*1. This equipment complies with the standard GB 9706.1-2020 General Requirements for Basic Safety and Basic Performance of Medical Electrical Equipment

According to the experimental setupGB 9706.1-2020第15.3.5 Designed for rough handling tests and other sections

2. Standard content: GB9706.1-2020-15.3.5 * Rough handling test, the moving ME equipment and its moving parts should be able to withstand the stress generated by rough handling and movement, and should not pose unacceptable risks. Verify compliance with requirements through the following tests. The sample shall be tested under any appropriate safe working load and the most adverse conditions allowed for normal use in the transport posture. During the experiment, appropriate preventive measures should be taken to avoid imbalance caused by rough handling stress or impact.

3. Equipment purpose: Used for inspecting mobile MEequipment andMEThe moving parts of the equipment should be able to withstand the stress generated by rough handling and movement, and should not pose unacceptable risks.

4. Performance indicators

*4.1. Sample movement speed 0-1.5m/sCan be set, accuracy0.01m/s

4.2. Thrust stroke 400mm

*4.3. Step height 40mm±1mm/s The upper and lower steps are made of hardwood40 * 40 * 1200 (adjustable according to customer's ME sample), cement platform (or solid wood panel (material and size determined according to customer's sample requirements)

4.4. Equipment power supply: 220VAC 1KW.

*4.5. Complete set of testing equipment (users need to provide the maximum size of ME equipment)

4.6. Control mode: The human-machine interface adopts Siemens touch screen. friendly interface

4.7. Experimental apparatus: (customized according to the size of the user's ME equipment)

4.8. The upper and lower impact tables, door frame obstacles can be removed, and the trolley can be fixed separately with the impact table during the movable test

5. Configuration

5.1 Tooling: 1 set of aluminum profiles, aluminum alloys, hardwood, cement board (solid wood board), stainless steel, rollers, nylon, etc

*5.2 Servo motor/ball screw/control box/control circuit/software: 1 set each

*5.3 Control PLC/True Color Touch Screen: 1 set each