Lamp Aging Test Stand DMS-LH

According to the GB7000.1-2007 American Energy Star standard, the aging test rack for lighting fixtures is required to have fault detection functions such as open circuit detection and short circuit detection, and to record and save the cause of the fault, the time of the fault, and the number of completed tests. At the same time, different sound and light alarms should be generated based on different faults.

1、 Equipment Overview:

comply withGB7000.1-2015According to the standard, this lifespan testing rack complies with the requirements of the American Energy Star standard. The equipment has fault detection functions such as open circuit detection and short circuit detection, and records and saves the cause of the fault, the time of the fault occurrence, and the number of completed tests. At the same time, different sound and light alarms are generated based on different faults. Provide various types of lamp installation plates, platforms, hooks, and light blocking partitions to adapt to different lamp testing.

IIFunctional parameters:

1. The main switch of the equipment adopts a leakage protection switch, which automatically trips and cuts off the power supply when the current exceeds the personal safety limit, ensuring personal safety.

2. In order to avoid overloading of aging equipment, each floor is equipped with a fully automatic overload detection and protection device. When the current exceeds the set value, the equipment will automatically stop aging and prompt that it is in overload protection shutdown.

3. Each layer of the equipment is equipped with a short-circuit protection switch.

4. Upper and middle level configurations1Taiwan5KVA/0-300VManual regulator, lower level configuration1Taiwan10KVA/0-300VManual voltage regulators are equipped with digital voltmeters.

5. Each layer is independently setON/OFFThe impact, power on, and power-off times can be freely set, with * units being1In seconds.

6. Real time online detection of the current, voltage, power, and power factors of each lamp. The system will number and monitor the product according to its location on the interface. If the tested product malfunctions (such as power exceeding the range), the monitoring system display screen will display a color change alarm at the corresponding position (qualified or unqualified), which is intuitive and convenient, greatly improving production quality and efficiency.

7. The aging process is: keep on for a period of time → ON/OFF shock for a period of time → keep on for a period of time → automatic shutdown.

8. The input current for high load in the upper and middle layers is10AThe input current for the lower layer * heavy load is20A.

9. Composition of control system: XinjiePLC+Color touch screen.

IIIOrganizational characteristics:

1. Test rack total120A testing position, divided into/Chinese/Lower three levels, upper level60One, mid-level40One, lower level20One.

2. The upper level is60aE27Lamp holder, lamp holder installed downwards, middle layer20aB22Lamp holder and20aE40Lamp holder, installed downwards, The lower level is10Install the four position clamp wire upwards.

3. The main frame of the rack adopts40*40*1.2Square welding processing, surface spray treatment;

4. The outer partitions and shelves of the rack are made of¢ 1.2Cold plate bending processing, surface spraying treatment;

5. The electrical control box is set on one side of the rack, and the whole machine is sprayed with computer color;

6. Wheels are used4Wanxiang, among which2Equipped with brakes.