Impact resistant load testing machine

Technical Specifications:

1Control mode: PLC control, touch screen human-machine interface intelligent operation;

2Testing station: 1 station;

3、 DMS framework structure: The impact device adopts a gantry structure, and the sample installation table is based on a standard rotating table, with the bottom four corners usingThe pneumatic pressure plate is fixed independently of the impact table, equipped with a leveling transport device and a standard independent control box, all of which use steel anti-static spraying technology;

4Sample size: maximum1000*800*2000mm(length, width, height), the smallest400*400*500mm(length, width, height)；

5Impact configuration:

5.1、 15KG soft rope connected dry sandbag;

5.2、 1 2Kg steel ball;

5.3、 15KG soft rope steel ball;

5.4、 5Kg, 1 20J angular object;

Punch specifications:

6.1The maximum outer diameter of the dry sand bag is 200mm, with a straight body of 230mm, a diagonal angle of 100mm, and a soft rope closure of 100mm. It is equipped with 0.5-0.8mm dry sand particles and a steel lifting structure installed at the bottom for easy lifting and release, as well as to prevent secondary impact;

6.2The outer diameter of the swing tube is 9mm, the wall thickness is 1mm, and the diameter of the steel ball is 80mm;

6.3The steel ball has a diameter of 160mm and is equipped with a lifting structure;

6.4Half spherical top R2.5mm, taper 22 °, counterweight straight body diameter 110mm;

7Lift drive: stepper AC motor drives ball screws on both sides;

8Angle drive: achieved by connecting a high-power stepper motor to a turbine reducer;

9Impact driven: Electromagnetic attraction and release;

10Prevent secondary impact: pneumatic;