IPX8 diving test device DMS-IPX8

The IPX8 diving test device is based on the requirements of relevant standards GB4208 and IEC60529. The IPX8 diving test device is used to test the protective performance of equipment with water ingress prevention. It is suitable for product inspection and quality control by relevant enterprises and quality inspection departments, and should be used for testing when the characteristic number of the shell protection level is 7 or 8.

Product Technical Specifications

1. Pressure vessel: steel tank, diameter500 mm, height1m

2. Simulating the pressurization of a water tank through compressed air0～30Meter water pressure;(Can simulate different water depths according to requirements)

3. Pressure holding range: normal pressure -0.2 MPa

4. Pressure system: silent compressed air compressor

5. Time control:0～99divide99second

6. Equipped with pressure protection device and drainage pressure relief device

7. The internal surface is made of stainless steel material

8. The immersion depth can be adjusted according to the size of the product and can be observed externally

9. Sealed container design, applied with compressed air1～5A pressure of one atmosphere

10. Using intelligent sensors to sense water pressure data and feedback it to customized instruments

11. The atmospheric pressure value is displayed using a dedicated instrument (and can also display a bar chart)

12. Working gas source: external connection; Attached sample holder

13. Working power supply:220V，50Hz

Product accessories

1. Sealed container (Ø 500mm * 1000mm (H))

2. Pressure sensing device

3. Pressure numerical display meter, digital display of water depth in meters and pressure

4. One working air source (silent air compressor)

5. Equipped with pressure protection device and drainage pressure relief device

IPX1-8The waterproof grade equipment adopts a centralized human-machine interface control system, including the following accessories

Siemens brand5.7Inch human-machine interface andPLCcontrol system

Centralized integrated control cabinet

Equipment power supply line (independent with protection)

Specialized in developing software systems

According to the specific requirements of the customer, the specific configuration situation is hereby stated as follows:

1. Considering that the customer is a comprehensive waterproof testing laboratory, a centralized control method is adopted, which is more aesthetically pleasing and convenient;

2. Adopting centralized control and human-machine interface+PLCcontrol The parameters such as test time, interval, and operation process can be intuitively set and controlled;

2. Considering the cost of IPX5/6 flow, manual adjustment valves and reflux valves are used to regulate the flow rate, which is displayed through flow meters for easy operation;

4IPX3/4Due to the speed and angle requirements for the swing of the swing tube, imported servo motors are used+Dedicated driver+The feedback method of imported frequency converter automatically sets and adjusts the swing angle and speed of the swing tube;

5. In addition to providing sufficient spare parts, automatic air pressure flushing devices are equipped to address the problem of clogging of drip heads and spray nozzles. This not only effectively solves the problem of clogging, but also facilitates timely removal of scale and drying.