The IPX waterproof and dustproof test box complies with IEC60529, GB4208 Figure 2, and GB7000.1, and is used for conducting dustproof tests on electrical, electronic, automotive, motorcycle, and other products, components, etc. The inner liner is made of S304 stainless steel structure or the shell is coated with electrostatic powder. The system adopts PLC control and touch screen for easy operation. The test box should comply with the dust-proof box requirements in Figure 2 of GB 4208-2008
+8675526585726
sales@damslab.com
DESCRIPTION
、Technical Requirements:
l Test space size: 1000×1500×1000（mm）Depth x length x height; The door size is approximately1500×1000（mm）.
l Metal square hole sieve:Metal wire diameter50Mm; sieve size75Mm
l The amount of talc powder used is per cubic meter of the test chamber volume2kgThe number of uses shall not exceed20Next time)
l enclosedThe powder in the test chamber can circulate to suspend the talc powder
l Equipped with an automatic vibration device;
l The box door has a large observation window,And equipped with a dust scraper, the box is reserved with one test cable hole
l sample holder2Layer (movable), maximum load-bearing capacity100kgA single sample;
l Dust heating system, test temperature: (room temperature~)65）℃ adjustable;
l During dynamic testing, dust concentration is measured using a dust concentration meter.
l In the static state, the system self checks and alarms when there is insufficient dust (determined by sensing the height of the powder layer in the powder collector); After the experiment, there is a dedicated channel for recycling the waste dust;
l Dosage of talcum powder:2Kg/m3-4Kg/m3
l Programmable settings for blowing dust, stopping blowing time, and cycle time;
l Metal square hole sieve, wire diameter50Mm, sieve size75Mm；
l Extraction volume（1～20000）L/hAdjustable, capable of meeting the housing capacity of（0.001～400）LConduct a suction test on the sample of volume;
l Test time:0-99h99M99S,Can be set
l Equipped with vacuum pump and flow meter
l Vacuum pressure display range:0-2Kpa.
l Sample vacuum pressure display (using vacuum pressure to reflect the sealing or intake status of the sample.)
l Equipped with vibration function;
l Control system:PLCController, motor frequency converter system
l Display control mode: Color touch screen (human-machine interface)
l Low noise, strong sealing,No dust leakage during the experiment,Reliable performance.
l Equipment: sieve, funnel, vibrator, air circulation pump, heater, vacuum pump, dust filter, air flow meter, pressure gauge.
l Test the internal sample power socket and external control switch.
l Protection devices: leakage, short circuit, overheating, motor overheating, overcurrent protection/Controller power outage memory.
l Equipment power supply:220V± 10％，50Hz±2Hz.
l Equipped with a pack of talcum powder40kg，2kgPack each small bag separately.
l Equipped with a movable simulated wall that meets the size of the test chamber1The simulated wall can be smoothly placed inside the test chamber. There are installation holes on the simulated wall for installing samples. Mainly for installing electricity meters,Adopting a grid design, the spacing between each layer and grid can be adjusted to accommodate different sizes of electricity meters (one meter)7KG左右）.Easy to disassemble and assemble..
l Equipped with an electric forklift (at least)100kg）
INQUIRY
+8675526585726
sales@damslab.com
English
