This tester is in conformity with the requirements for test equipment specified in ANSI/UL94、IEC60950-1、IEC695-2-2standards. It can be used for the horizontal and vertical flame test on the plastic parts of electric equipment and instruments.
+8675526585726
13609623361@139.com
PARAMETERS
Ⅰ Overview
This tester is in conformity with the requirements for test equipment specified in ANSI/UL94TheIEC60950-1TheIEC695-2-2standards. It can be used for thehorizontal and vertical flame test on the plastic parts of electric equipment and instruments.The casing of the body is made from stainless steel and equipped with transparent viewing window. The digit-display timer can record the time for applying flame, remaining flame and remaining heat. The tester features its good looking, easy operation and stable performance.
Ⅱ Technical parameters
1.Power: 220V AC 50HZ
2.Flame-applying time: 0~999.9S (adjustable)
3.Flame-remaining time: 0~999.9S (adjustable)
4.Heat-remaining time: 0~999.9S (adjustable)
5.Flame-applying times: 0~9999 times (adjustable)
6.Combustion angle: 0°,20°,45°for options
7.Flame height: 20mm ~ 175mm (adjustable)
8.Air flow: 0.03~ 0.3l/Min
9.Air pressure: 0 ~ 1 Mpa; back pressure: ±200mm water column
10.Parameters for size: internal diameter of the spraying tube: 9.5mm; effective length of the spraying tube: 100mm; volume of the combustion chamber is more than 0.75m3
11.Position adjusting: The sample frame can be adjusted upward, downward, leftward and rightward. The combustion base can be adjusted forward and backward. The adjustment travel is more than 300mm.
INQUIRY
+8675526585726
13609623361@139.com