High temperature environment type appliance switch life machine DMS

Overview of switch life machine for high-temperature environment appliances:
The switch life machine for high-temperature environment appliances complies with the corresponding clauses of GB15092.1, GB16915, and UL1054 standards. This testing machine is used in conjunction with SH9403 and SH9404 series load cabinets and can perform electrical load life testing on various equipment switches. Using cylinder driven method, the durability test of the switch is completed by repeatedly operating the buttons and toggle switches through the sliding rod action and the toggle block installed on the sliding rod (which can be replaced with other forms of structural blocks for other forms of switches); Intelligent control system, capable of setting various parameters and displaying status; The test cycle and load connection time can be set and controlled by the controller. When the power load of the test sample is turned on or off for more than a set time (usually 5 seconds, adjustable) or number of times, the testing machine automatically cuts off the load power and sends an alarm signal.
Technical parameters of switch life machine for high-temperature environment appliances:
Equipment working power supply: AC 220V/10A/50Hz;
Test gas source: 0.1m ³, 8-10 kg/cm ³;
Rate: 1 to 30 beats per minute (adjustable);
Counter: 0-999999 times can be preset;
Workstation: 2-4 (optional number of workstations);
Temperature range: normal temperature to 160 ℃± 2.5 ° C;
Linear velocity of switch drive rod: 4-20 mm/s (25-100 mm/s at acceleration);
If the tested switch casing is energized and short circuited during the experiment, it has a power-off protection device.
Dimensions: 1200L × 650D × 900Hmm