The helmet hardness testing machine meets the standards: designed and manufactured in accordance with sections 4.2.6 and 5.6 of GB811-2022 “Motorcycle Passenger Helmets“ and GB24429-2009 “Safety Requirements and Test Methods for Sports Helmets“ Applicable standards: According to the requirements of GB 811-2010 standard Purpose: Used to test the strength of helmets, measure the deformation of helmets after applying a certain force Features: 1. Initial load 30N (hold for two minutes) 2. Increase the load by 100N every two minutes until 630N (hold for two minutes) 3. Reduce the load by 100N per minute until it reaches 30N 4. The pressure resistance speed and holding time can be freely set 5. Touch screen control
+8675526585726
sales@damslab.com
DESCRIPTION
Helmet hardness testing machine
1、 Product Overview: Suitable for testing the strength and lateral rigidity of helmet wearing.
2、 Compliant with standards: According to GB811－2022In 'Motorcycle Passenger Helmets'4.2.6Chapter 5.6GB24429－2009《Safety requirements and test methods for sports helmets》The standard requires design and production.
threeMain parameters:
1Control mode: PLC control, touch screen human-machine interface operation;
2Testing station: 1 station;
3Drive power: Panasonic servo motor connected to ball screw;
4Test range: 200mm；
5、Equipment travel: maximum distance300mm；
6、Measurement force category: maximum200Kg；
7Force unit: N, Kg switchable;
8Specification of pressure plate: diameter 100mm, one set on top and one set on the bottom, made of chrome steel, hardness HRC45 °;
INQUIRY
+8675526585726
sales@damslab.com
English
