Electrical stress testing device DMS for electrical mechanical contact system

1. Complies with the requirements of Chapter 4.11.6 of GB7000.1-2015 standard and meets the specifications in Figure 31.
Electrical stress testing device for electrical mechanical contact system 2. Gas source: 6-8 gk/cm2.
3. Connection time: adjustable from 0 to 99.9 seconds (minutes).
4. Instrument functions
4.1. Test on/off mode: Equipped with an intelligent control system, capable of independently connecting the load and controlling it in sections.
4.2. It can achieve two ways of opening and closing: electrical triggering and mechanical triggering.
4.3 Intelligent discrimination function: When the test sample is bonded, continuously connected or disconnected, an alarm can be triggered when the set number of times is reached.
4.4 After the mechanical frequency test of the testing machine is completed, it can be directly switched to the pressure drop test. You can set the number of on/off cycles, test voltage, current, and load power factors.
5. Time cycle
5.1. Test cycle time: adjustable from 0 to 99 seconds.
5.2 Counter: 0 to 9999 times can be preset.