Electric wheelchair drop tester

One; testTest standard:ISO 7176-8andgbT18029.8 2008

2、 Test requirements:

1Can enable wheelchairs to move from50mm±5mmFalling from a high place onto a rigid horizontal testing plate;

2Can rotate the wheels of the wheelchair to avoid the impact of each wheel drop acting on the same part;

3Ensure that the wheelchair remains stationary before each fall;

4There is a drop counter.The number of drops can be set,

5Ensure that all wheels of the wheelchair land simultaneously every time it falls.

6The wheelchair should automatically complete the lifting and falling of the wheelchair.

1）Free fall height:50mmThe time error shall not exceed ±5 mmThe height of the falling object should be adjustable;

2）*The angle that can be changed by each impact wheel: ≥10°；

3）Test frequency: not limited to 0～9999 Secondly, it should be possible to set;

4）Microcomputer automatic control, color touch screen setting parameters, with data storage function, can be accessed throughUAutomatically generate reports from the disk;

5）Steel plates for testing require electrostatic spraying;

6）Angle changing device: not less than 4 Set;

7）#Adjustable distance between front and rear wheels: better than or equal to 0～300mmAdjustable distance between left and right wheels: better than or equal to 0～

200mm；

8）Quality mentioned: ≥150kg；

9）Maximum external dimensions(length, width, height)：2.0m×2.0m×2.5m；