Electric bicycle water immersion test device GB 17761-2018DMS

Electric bicycle water immersion test device GB 17761-2018

Electric bicycle water immersion test device

1、 Equipment usage:

Compliant with national standardsGB17761-2018 "Safety Technical Specification for Electric Bicycles", GB17761-1999 "Safety Technical Specification for Electric Bicycles", and GB24155-2009 "Safety Requirements for Electric Motorcycles and Electric Light Motorcycles" specify the technical requirements for water immersion testing. This device can conduct experiments indoors in a pool with a depth of 100mm. The electric bicycle can be driven at a speed of 15km/h for 500m or for a total time not exceeding 10 minutes to test its water wading performance.

IIMeet the standards:

GB17761-2018 "Safety Technical Specification for Electric Bicycles";

GB17761-1999 "Safety Technical Specification for Electric Bicycles";

GB24155-2009 "Safety Requirements for Electric Motorcycles and Electric Light Motorcycles".

3、 Working conditions:10℃～30℃

4、 Main technical parameters:

1. The overall depth of the water wading device is 200mm, and the water wading depth mark is 100mm. There is an automatic drain outlet at a water depth of 100mm, and a water change switch is required at the bottom of the device. Drainage and water supply pipelines are also provided

2. The run-up section is 16m, the slope section is 1m, the length of the wading pool section is 25m, and the width is 1.5m;

3. The overall material of the water immersion test device is made of SUS304 # stainless steel, which is resistant to rust and corrosion, has good sealing performance, does not leak water, and has automatic drainage after exceeding the water level. It also has water supply and drainage devices.