Electric bicycle water immersion test device GB 17761-2018DMS

Electric bicycle water immersion test device GB 17761-2018

Electric bicycle water immersion test device

1、 Equipment Overview:

fully satisfyDesign and manufacture according to the requirements of Article 7.2.8.1 "Water Spray Test" in GB17761-2018 "Safety Technical Specification for Electric Bicycles" and the sprinkler head water spray test requirements specified in GB4208-2017 (IPX3); Used for simulating the water spraying performance of electric bicycles.

2、 Meet the standards:According to clause 7.2.8.1 of GB17761-2018 "Safety Technical Specification for Electric Bicycles", it is required to conduct a water immersion test.

3、 Main technical parameters:

1. Spray nozzle aperture: ￠ 0.5mm;

2. Total number of holes: 121;

3. Distribution of drainage holes: 1 central hole, 24 holes with an angle of 30 ° in the inner two circles, and 96 holes with an angle of 15 ° in the outer four circles;