Charging gun pendulum impact and drop test device

Technical Specifications:

1Control method:PLCControl, touch screen human-machine interface intelligent operation;

2Testing station:1Workstation;

3Impact specification: swing rod length1000Mm, it needs to be configured according to the weight of the hammerhead and the equivalent mass of the hammerhead;

4Structural principle: The sample is placed normally, the impact point is adjusted, the impact device is positioned, and the hammer head of the release rod is used to freely impact the sample;

5Overall architecture: Fangtong skeleton welding and spraying, testing rack and control box separated;

6Impact drive: stepper reduction motor, electromagnetic attraction and release;

7Impact height: The stepper motor adjusts different angles through angular torque to achieve the corresponding impact height;

8Swing rod length: from the center of the swing rod seat to the center of the impact hammer1000㎜；

9Configure pendulum hammer head: standard configuration2JThe5JThe10JThe20JThe50JFive each with a swing rod; Falling hammer head:5JThe10JThe20JThe50JCorresponding configuration hammer:1.7kgThe5kgThe5kgThe10kgOne each, equipped with a stainless steel drop protector;

10Component material: Steel surface coated with hard chromium according to standard requirements;

11Adjustable height: pendulum200-2000mm,drop hammer2500mm；