Car Charging Gun Vehicle Rolling Test Machine

1、 Product Overview:Place the power plug and vehicle plug with the manufacturer's recommended cable randomly on the cement floor according to standard requirements5000±250NThe pressure, to(8±2)km/hThe speed exceeds the power plug or vehicle plug(Tire inflation pressure220±10 kPa)To test the ability of power supply or vehicle plugs to withstand crushing.The experimental device mainly consists of two parts: electrical and mechanical. The mechanical part mainly consists of the power part, transmission part, slide table, cylinder, etc. The motor adopts servo motor. The electrical control system is composed of programmable controllers and touch screens, which facilitate users to set various test parameters and enable remote control. The experimental device is designed according to the testing standards,It is an ideal testing device for professional testing institutions, product manufacturers, and quality inspection departments at all levels, as it can meet the requirements of customer tire crushing charger testing.

2、 Compliant with standards: According toGB/T20234.4-2022Standard No9.21Chapter, photoGB/T 20234.1—202Xpass the civil examinations7.13Chapter requirements.

3、 Technical parameters:

1Control system:PLCControl, touch screen display;

2Testing station:1Workstation;

3Power system: servo motor and planetary gearbox;

4Framework structure: load-bearing typeUWelding and spraying treatment of section steel and steel plate;

5Load bearing capacity:5000N±250NThe unit system can be switched according to experimental requirements by loading weights;

6Rolling speed:8±2km/h；

7Bearing base plate: cement base plate;

8Testing method: The load-bearing square box with tires can move freely up and down through the imported guide components;

9Tire drive: servo motor+Worm gear reducer;

10Sample drive: Double cylinder reciprocating drive;

11Sample installation: hoisting the square box with a winch;

12Protection mode: After the hoist lifts the square box, the safety bolt is fixed, and protective nets are installed on both sides of the machine;

13Main configuration: The test sample is equipped with roller sets on both sides and external spoke type weighing sensors;

14Crushing the main component: Michelin tires（P225/75R15）；

15Timing and counting: It can be set within the standard requirements of the touch screen;

16Equipment reserved space: long4000mmX width3000mm；

17Dimensions: Length5100mmX width1300mmX high1500mm;

18Working power supply:380V.50Hz.5kw;

19Equipment weight: approximately2Ton.