1、 Product Overview: Fix the rear fork end of the bearing on the test bench through a fixed shaft, fully simulate the original size of the frame, and lift the front fork frame to a height of 300mm under load configuration. Observe the mechanical strength of the front fork and frame after testing. 2、 According to the standards: made in accordance with the requirements of sections 6.2.1.2.2 and 7.3.1.2.2 of GB17761, section 4.1.2 and Figure 1 of ISO 4210.6-2014, and section 4.8.2 and Figure 28 of EN14766:2005.
+8675526585726
sales@damslab.com
DESCRIPTION
Technical Specifications:
1Control mode: PLC control, touch screen human-machine interface operation;
2Vehicle lifting speed: can be set within standard requirements;
3Enhance drive: stepper reduction motor;
4Working mode: Electromagnetic attraction and release;
5Falling height:200-500mm, placed above the rear wheel axle;
6、Hardness of steel anvil: HRC≥50；
7Height calculation: tape measure measurement 0－500mm；
8Adjustable distance of steel anvil: ≥300mm(Convenient for testing vehicles of different sizes);
7Height measurement error: ± 1mm;
8Saddle weight:70Kg;
9Weight accuracy: stacked, 1%;
10、Installation core shaft size: maximum outer diameter 55mm, arc 220mm;
11Roller requirements: chrome plated steel, HRC55 °, weight 1 kilogram;
INQUIRY
+8675526585726
sales@damslab.com
English
