Operation specifications and safety precautions for horizontal and vertical combustion tester

　　Horizontal and Vertical Combustion TesterAs an important equipment for testing the flame retardant performance of materials, the standardization and safety of its operation directly affect the accuracy of test results and personnel safety. Strictly following operating procedures and keeping safety precautions in mind are necessary prerequisites for conducting experiments smoothly.

The preparation work before the experiment is the foundation for ensuring smooth operation. Firstly, it is necessary to carefully check whether all components of the testing instrument are intact, including the burner, ignition device, ventilation system, etc., to confirm that there is no looseness, damage or leakage. At the same time, according to the testing standards and material characteristics, accurately select and install suitable fixtures to securely fix the specimens and ensure their stable position during the testing process. In addition, protective equipment such as goggles and heat-resistant gloves should be prepared, and the testing environment should be well ventilated and kept away from flammable and explosive materials.

The operation process must strictly follow the standardized procedures. After starting the device, set the parameters such as combustion time and flame height according to the test requirements, and calibrate them. Before ignition, confirm again that the ventilation system is operating normally to prevent the accumulation of harmful gases generated by combustion. When igniting, strictly follow the operating instructions to avoid accidental flame spraying. During the experiment, closely observe the combustion situation of the sample, record the combustion time, propagation length and other data in a timely manner. If any abnormal situations occur, such as unstable flames or sample detachment, the experiment should be stopped immediately and the problem should be investigated. After the experiment is completed, first close the gas valve, wait for the burner to fully cool down, then turn off the power, clean the test residue, and keep the equipment clean.

Safety precautions run through the entire testing process. During the experiment, it is strictly prohibited for operators to leave their posts without authorization to avoid being unable to handle emergencies in a timely manner. Do not touch high-temperature components during device operation to prevent burns; If a fire occurs during the experiment, nearby firefighting equipment should be used immediately to extinguish it, and the power and gas sources should be cut off. At the same time, regular maintenance and upkeep of equipment should be carried out, key parts such as gas pipelines and circuit systems should be inspected, and aging components should be replaced in a timely manner to ensure safe and stable operation of the equipment.

Standard operationHorizontal and Vertical Combustion TesterValuing every safety detail not only ensures the reliability of test data, but also provides solid guarantees for the safety of operators and the long-term use of equipment.